Task 14: Register/Back Up the System
The final three steps the AT&T service technician performs to install the DEFINITY LAN Gateway system are as follows:
Task 14A: Register the System
Task 14B: Deactivate/Activate Logins
Task 14C: Perform a Backup of the Removable Medium
Task 14A: Register the System
AT&T Services personnel should call the TSC at
Task 14B: Deactivate/Activate Logins
After the system has been registered, the service technician should log out of the system. At this point, the technician gives the telephone to the customer for activation of the customer login. Once the customer login is enabled, the customer is required to enter a password the first time he or she logs in. AT&T
Services will have no knowledge of this password.
NOTE:
The customer must be present for customer login activation. If the customer cannot be present, the service technician should leave a note for the customer to call
Customers should see the Change Passwords screen in Chapter 3 to change accessible passwords.
NOTE:
Task 14B renders the services login inactive. Subsequent need for the services login requires coordination with the TSC through the TSC dispatch process.
Task 14C: Perform a Backup of the Removable
Medium
The customer should have received a blank tape as part of the DEFINITY LAN Gateway system order. (See Table
NOTE:
The craft login has been deactivated at this point.
1.Take the blank tape out of the box.
2.The tape must be writeable. To make the tape writeable, move the write protect marker forward (in the direction of the arrow on the tape label).
Issue 1 January 1996
