Port Number (Command)
Enter the port number to be used for controls if you select “FTP” as the protocol. Generally
Network Path
When you select “SMB” as the protocol, enter the network path to the Save as file. For example, to specify the “\\192.168.1.1\user\scanned” folder in the SMB server, enter “\\192.168.1.1\user\scanned”.
When you select “FTP” as the protocol, enter the directory in the specified FTP server. For example, to specify the “ftp://192.168.1.1/user/scanned” folder in the FTP server, enter “user/scanned”.
When you select “NetWare IPX/SPX” or “NetWare TCP/IP” as the protocol, enter the folder path in the NetWare file server. For example, to specify the “sys\scan” folder in the NetWare file server, enter “\sys\scan”.
Login User Name
Enter the login user name to access an SMB server or an FTP server, if required. When you select “FTP” as the protocol, an anonymous login is assumed if you leave this field blank.
Password
Enter the password to access a SMB server or an FTP server, if required.
Retype Password
Enter the same password again for a confirmation.
3)Destination — Remote 2
Check this box to save a received Fax to the Save as file. How you can set this item depends on how your administrator configured the Save as file settings. Please refer to the descrip- tion of the Remote 1 option for each item.
If the Remote 2 does not allow specifying a Save as file, you can only select “Use Adminis- trator Settings”. The protocol and the network path are displayed below this item.
Remote 1 is selected by default. To select Remote 2, first deselect Remote 1.
4)File Name
The file name will be “(From
