8 TopAccess ADMINISTRATION TAB PAGE - SETUP
MENU (Scanning Function)
86 Setting up Print Service Settings (Scanning Function)
Setting up Print Service Settings (Scanning Function)
In the Print Service submenu page in the Setup menu, an administrator can configure such print
services as Raw TCP Print, LPD Print, IPP Print, NetWare Print, and Email Print.
Some settings may not apply to the LCD of this equipment as soon as you save the settings.
The settings will be updated by pressing the [FUNCTION CLEAR] button on the Control Panel
or after an Auto Clear time period.
Setting the print service settings
1
Select the [Administration] tab, enter the administrator's password
and click [Login].
To access the TopAccess administrator mode, see the Setup Guide for Printing
Functions.
2
Click the Setup menu and Print Service submenu.
The Scan to Print Service submenu page is displayed.
3
In the Print Service submenu page, set the Print Service settings as
required.
In the Print Service submenu page, you can set the following:
P.87 “Setting up the Email Print”