Registering Public Templates 119

Panel Setting
In the Panel Setting page, you can specify the method to display template icons on the TopAc-
cess panel display. You can also set notifications for templates.
1) Picture
These icons are displayed in the TopAccess panel display. The icons are automatically spec-
ified depending on the agents you selected.
2) Caption 1
Enter the text displayed next to the icon in the TopAccess panel display, or in the "Name"
field of the list display. Up to 11 one-byte letters and up to 5 two-byte letters can be entered.
3) Caption 2
Enter the text displayed next to the icon in the TopAccess panel display, or in the "Name"
field of the list display. Up to 11 one-byte letters and up to 5 two-byte letters can be entered.
4) User Name
Enter the owner name of the template. Up to 30 one-byte letters and up to 15 two-byte letters
can be entered.
5) Notification - Send email when an error occurs
Select this to send a notification message to the specified Email addresses when an error
has occurred.
6) Notification - Send email when job is completed
Select this to send a notification message to the specified Email addresses when a job is
completed.
7) Notification - Email to
Specify Email addresses to which the notification message is sent.
When you have enabled the Notification setting, be sure to set up the Email settings in the
Email submenu page of the Setup menu in the TopAccess in the administrator mode. For the
setting procedure, see the following section:
P.80 “Setting up Email settings”
3
4
5
6
7
2
1