System Administration
3.The following prompt appears: Are You Sure? (Y/N?) . Type Y and press Return . The Port Status/Control screen will reappear, showing the changed
state.
If you type N and press Return , the Port Status/Control screen will immediately reappear.
To close a port’s TCP connection:
1.Press Tab or use the arrow keys to move to the desired port.
2.Press DROP to close the port’s TCP connection.
NOTE:
New connections are permitted on this port.
3.The following prompt appears: Are You Sure? (Y/N?) . Type Y and press Return . The Port Status/Control screen will reappear, showing the change.
If you type N and press Return , the Port Status/Control screen will immediately reappear.
To set the Message Collection Period for a port, select the port and press MSGPER . The Message Collection Period screen will appear. If no ports are administered, pressing MSGPER does nothing.
