AT&T 555-230-223 manual Appendix a PBX Carrier Configuration Worksheets

Appendix A: PBX Carrier	A
Configuration Worksheets

This appendix contains worksheets helpful in installing the DEFINITY LAN Gateway system. Worksheet A-1is used to obtain an inventory of your present circuit pack arrangement in the PBX. Worksheet A-2is for help in determining how to rearrange these circuit packs to ‘‘free up’’ five slots for the DEFINITY LAN Gateway system assembly. Worksheet A-3is for listing the slots the system assembly will occupy.

Guidelines for using these worksheets are as follows:

1.Move as few circuit packs as possible.

2.Locate five contiguous slots to the far right (the high port slot numbers), if possible. Make sure there are at least six slots (control, port, or service) to the left of the assembly.

3.Don’t use carrier C.

4.There can be only 1 ED-1E546-70 assembly per carrier. If you have the DEFINITY AUDIX assembly in one carrier, put the DEFINITY LAN Gateway assembly in another carrier.

Issue 1 January 1996 A-1