Appendix F: Returning the | F |
Application to its Original State |
This appendix details how to return the system to its original state if it should crash.
1.Make sure the administrative/maintenance terminal is physically connected to Main/Port A on the TN2208.
2.Insert the original DEFINITY LAN Gateway tape that came with the system into the system assembly and close the lever.
3.Press the BACK, NEXT/NO, and ENTER/YES buttons on the faceplate of the TN2208 simultaneously. Hold them down until the LCD displays a line of stars.
4.When the stars disappear, the terminal screen displays a message such as the following:
MFB 386FW Version: AU00S07F0
Local Console: Output ON, Input OFF
Remote Maintenance Console: INACTIVE
5. Press CTRL C twice in quick succession.
The following prompt appears: command menu:
6.Type 7 and press Return . The following prompt appears:
Auto Boot Preempted
Enter 1 for Disk, 2 for Tape (Default=Disk):
Issue 1 January 1996
