9-14

Copying problems ____________________________

The fax does not make a copy.

The BJ cartridge may need to be replaced.
•Determine if the problem is with the BJ cartridge and replace if necessary (see p. 9-6).
The document may not have been loaded correctly into the document tray.
•Remove the document, stack it if necessary, and load it face up into the document tray
correctly
(see p. 3-2).
•Make sure the printer cover is closed.
The BJ cartridge may not be installed properly.
•Make sure the BJ cartridge is installed properly (see p. 1-9).
The fax may not be operating properly.
•Print the nozzle check pattern (see p. 9-5).

MEMORY FULL appears on the LCD when making multiple copies.

The fax’s memory is full.
•Print or delete any documents stored in memory (see pp. 4-14, 4-15) to free up space in the
fax’s memory, then start again.
•Change the scanning resolution and try copying again.
The document you are copying may have too many graphics.
•If multiple pages are being copied, separate the pages into smaller stacks. If not, make the
desired number of copies one at a time as needed.
nFor additional troubleshooting, see Print quality problems, p. 9-13.

General problems _____________________________

The fax has no power.

The power cord may not be plugged in securely.
•Check that the power cord is plugged securely into the fax and into the wall outlet (see p. 1-6).
If the fax is plugged into a power strip, make sure the power strip is plugged in and turned on.
The power cord may not be supplying power.
•Check the power cord by substituting with another.

The fax will not print reports.

The BJ cartridge may need to be replaced.
•Determine if the problem is with the BJ cartridge and replace it if necessary (see p. 9-6).

Nothing appears on the LCD.

The power cord may not be plugged in securely.
•Check that the power cord is plugged securely into the fax and into the wall outlet (see p. 1-6).
If the fax is plugged into a power strip, make sure the power strip is plugged in and turned
on. If the LCD remains blank, unplug the fax, wait five seconds, then plug it in again.