67-68
Cisco ASA 5500 Series Configuration Guide using the CLI
Chapter67 Configuring Connection Profiles, Group Policies, and Users
Supporting a Zone Labs Integrity Server
The following example shows how to set a client firewall policy that requires Cisco Intrusion Prevention
Security Agent for the group policy named FirstGroup:
hostname(config)# group-policy FirstGroup attributes
hostname(config-group-policy)# client-firewall req cisco-securit y-agent
hostname(config-group-policy)#
Configuring Client Access Rules
Configure rules that limit the remote access client types and versions that can connect via IPsec through
the ASA by using the client-access-rule command in group-policy configuration mode. Construct rules
according to these guidelines:
•If you do not define any rules, the ASA permits all connection types.
•When a client matches none of the rules, the ASA denies the connection. If you define a deny rule,
you must also define at least one permit rule; otherwise, the ASA denies all connections.
•For both software and hardware clients, type and version must exactly match their appearance in the
show vpn-sessiondb remote display.
•The * character is a wildcard, which you can enter multiple times in each rule. For example,
client-access rule 3 deny type * version 3.* creates a priority 3 client access rule that denies all
client types running release versions 3.x software.
•You can construct a maximum of 25 rules per group policy.
•There is a limit of 255 characters for an entire set of rules.
•You can enter n/a for clients that do not send client type and/or version.
To delete a rule, enter the no form of this command. This command is equivalent to the following
command:
hostname(config-group-policy)# client-access-rule 1 deny type "Cisco VPN Client" version
4.0
none Indicates that there is no client firewall policy. Sets a firewall policy
with a null value, thereby disallowing a firewall policy. Prevents
inheriting a firewall policy from a default or specified group policy.
opt Indicates an optional firewall type.
product-id Identifies the firewall product.
req Indicates a required firewall type.
sygate-personal Specifies the Sygate Personal firewall type.
sygate-personal-pro Specifies Sygate Personal Pro firewall type.
sygate-security-agent Specifies Sygate Security Agent firewall type.
vendor-id Identifies the firewall vendor.
zonelabs-integrity Specifies Zone Labs Integrity Server firewall type.
zonelabs-zonealarm Specifies Zone Labs Zone Alarm firewall type.
zonelabs-zonealarmorpro
policy
Specifies Zone Labs Zone Alarm or Pro firewall type.
zonelabs-zonealarmpro policy Specifies Zone Labs Zone Alarm Pro firewall type.
Table67-4 client-firewall Command Keywords and Variables