78-15
Cisco ASA 5500 Series Configuration Guide using the CLI
Chapter78 Configuring NetFlow Secure Event Logging (NSEL)
Feature History for NSEL
Table78-2 Feature History for NSEL
Feature Name
Platform
Releases Feature Information
NetFlow 8.1(1) The NetFlow feature enhances the ASA logging capabilities by logging flow-based events
through the NetFlow protocol. NetFlow Version 9 services are used to export information
about the progression of a flow from start to finish. The NetFlow implementation exports
records that indicate significant events in the life of a flow. This implementation is
different from traditional NetFlow, which exports data about flows at regular intervals. The
NetFlow module also exports records about flows that are denied by access lists. You can
configure an ASA 5580 to send the following events using NetFlow: flow create, flow
teardown, and flow denied (only flows denied by ACLs are reported).
We introduced the following commands: clear flow-export counters, flow-export
enable, flow-export destination, flow-export template timeout-rate, logging
flow-export syslogs enable, logging flow-export syslogs disable, show flow-export
counters, show logging flow-export-syslogs.
NetFlow
Filtering
8.1(2) You can filter NetFlow events based on traffic and event type, then send records to different
collectors. For example, you can log all flow-create events to one collector, and log
flow-denied events to a different collector.
We modified the following commands: class, class-map, flow-export event-type
destination, match access-list, policy-map, service-policy.
For short-lived flows, NetFlow collectors benefit from processing a single event instead of
two events: flow create and flow teardown. You can configure a delay before sending the
flow-create event. If the flow is torn down before the timer expires, only the flow teardown
event is sent. The teardown event includes all information regarding the flow; no loss of
information occurs.
We introduced the following command: flow-export delay flow-create.
NSEL 8.2(1) The NetFlow feature has been ported to all available models of the ASA.
NSEL 8.4(5) Flow-update events have been introduced to provide periodic byte counters for flow traffic.
You can change the time interval at which flow-update events are sent to the NetFlow
collector. You can filter to which collectors flow-update records will be sent.
We introduced the following command: flow-export active refresh-interval.
We modified the following command: flow-export event-type.