Cisco Systems ASA5515K9, ASA 5500 Sending Syslog Messages to an E-mail Address

77-10
Cisco ASA 5500 Series Configuration Guide using the CLI
Chapter77 Configuring Logging
Configuring Logging
Sending Syslog Messages to an E-mail Address
To send syslog messages to an e-mail address, perform the following steps:
logging ftp-server server path username password
Example:
hostname(config)# logging ftp-server 10.1.1.1
/syslogs logsupervisor 1luvMy10gs
Identifies the FTP server on which you want to store
log buffer content. The server argument specifies the
IP address of the external FTP server. The path
argument specifies the directory path on the FTP
server where the log buffer data is to be saved. This
path is relative to the FTP root directory. The
username argument specifies a username that is valid
for logging into the FTP server. The password
argument indicates the password for the username
specified.
logging savelog [savefile]
Example:
hostname(config)# logging savelog latest-logfile.txt
Saves the current log buffer content to the internal
flash memory.
Command Purpose
Command Purpose
Step1 logging mail {severity_level | message_list}
Example:
hostname(config)# logging mail high-priority
Specifies which syslog messages should be sent to an e-mail
address. When sent by e-mail, the device name appears in the
subject line of the e-mail message and the syslog message
appears in the body of the e-mail message. For this reason, we
recommend configuring this option to notify administrators of
syslog messages with high severity levels, such as critical,
alert, and emergency.
Step2 logging from-address email_address
Example:
hostname(config)# logging from-address
xxx-001@example.com
Specifies the source e-mail address to be used when sending
syslog messages to an e-mail address.
Step3 logging recipient-address e-mail_address
[severity_level]
Example:
hostname(config)# logging recipient-address
admin@example.com
Specifies the recipient e-mail address to be used when sending
syslog messages to an e-mail address.
Step4 smtp-server ip_address
Example:
hostname(config)# smtp-server 10.1.1.1
Specifies the SMTP server to be used when sending syslog
messages to an e-mail address.