Cisco Systems ASA5515K9, ASA 5500 Installing and Enabling Host Scan on the ASA

76-3
Cisco ASA 5500 Series Configuration Guide using the CLI
Chapter76 Configuring AnyConnect Host Scan
Installing and Enabling Host Scan on the ASA
Installing and Enabling Host Scan on the ASA
These tasks describe installing and enabling Host Scan on the ASA:
•Installing or Upgrading Host Scan
•Enabling or Disabling a Host Scan
•Viewing the Host Scan Version Enabled on the ASA
•Uninstalling Host Scan
•Assigning AnyConnect Feature Modules to Group Policies
Installing or Upgrading Host Scan
Use this procedure to install or upgrade the Host Scan package and enable it using the command line
interface for the ASA.
Prerequisites
•Log on to the ASA and enter global configuration mode. In global configuration mode, the ASA
displays this prompt: hostname(config)#
•Upload the hostscan_version-k9.pkg file or anyconnect-NGC-win-version-k9.pkg file to the ASA.
Detailed Steps
Command Purpose
Step1 webvpn
Example:
hostname(config)# webvpn
Enter webvpn configuration mode.
Step2 csd hostscan image path
Example:
ASAName(webvpn)#csd hostscan image
disk0:/hostscan-3.6.0-k9.pkg
ASAName(webvpn)#csd hostscan image
disk0:/anyconnect-NGC-win-3.0.0327-k9.pkg
Specify the path to the package you want to designate as the
Host Scan image. You can specify a standalone Host Scan
package or an AnyConnect Secure Mobility Client package as
the Host Scan package.
Note For all operating systems, Windows, Linux, and
Mac OS X, customers need to upload the
anyconnect-NGC-win-version-k9.pkg file in order for
the endpoints to install Host Scan.
Step3 csd enable
Example:
ASAName(webvpn)#csd enable
Enables the Host Scan image you designated in the previous
step.
Step4 write memory
Example:
hostname(webvpn)# write memory
Saves the running configuration to flash.
After successfully saving the new configuration to flash
memory, you receive the message [OK].