Appendix C Configuring the Switch with the CLI-Based Setup Program
Accessing the CLI Through the Console Port
Figure C-1 Removing the USB Mini-Type B Console Port Cover
332703
0.5-3.0A
16TC
RJ-45 Console Port
Step 1 Connect the RJ-45-to-DB-9 adapter cable to the 9-pin serial port on the PC. Connect the other end of the cable to the switch console port.
Step 2 Start the terminal-emulation program on the PC or the terminal. The program, frequently a PC application such as HyperTerminal or ProcommPlus, makes communication between the switch and your PC or terminal possible.
Cisco IE 2000 Switch Hardware Installation Guide
