Network Configurations | Cisco Systems IE20004TSB, IE20004TSL

Chapter 1 Product Overview

Network Configurations

•Cisco IOS CLI

The switch CLI is based on Cisco IOS software and is enhanced to support desktop-switching features. You can fully configure and monitor the switch. You can access the CLI either by connecting your management station directly to the switch management port, or a console port, or by using Telnet from a remote management station. See the switch command reference on Cisco.com for more information.

•Cisco Prime LAN Management Solution 4.2

http://www.cisco.com/en/US/docs/net_mgmt/ciscoworks_lan_management_solution/4.2/device_su pport/table/lms42sdt.html#Cisco IE 2000 Series Switches

•SNMP network management

You can manage switches from a SNMP-compatible management station that is running platforms such as HP OpenView or SunNet Manager. The switch supports a comprehensive set of Management Information Base (MIB) extensions and four Remote Monitoring (RMON) groups. See the switch software configuration guide on Cisco.com and the documentation that came with your SNMP application for more information.

•Common Industrial Protocol

The Common Industrial Protocol (CIP) management objects are supported. The Cisco IE 2000 can be managed by CIP-based management tools, allowing the user to manage an entire industrial automation system with one tool.

•PROFINET TCP/IP and RT

This switch supports PROFINET TCP/IP and RT and can be managed by Siemens' automation software such as STEP 7.

Network Configurations

See the switch software configuration guide on Cisco.com for network configuration concepts and examples of using the switch to create dedicated network segments and interconnecting the segments through Gigabit Ethernet connections.

	Cisco IE 2000 Switch Hardware Installation Guide
1-22	OL-25818-04

Image 30

Cisco Systems IE20004TSB, IE20004TSL, IE200016TCB manual Network Configurations

Contents

Cisco IE 2000 Switch Hardware Installation Guide Americas HeadquartersPage N T E N T S Installation Guidelines Connecting to a Dual-Purpose Port Verifying Switch Operation IP Settings Audience PurposeConventions Related Publications Product Overview Switch Models Model Description Software Image Model Description Software Image Model Description Software Image Front Panel Cisco IE-2000-4TS-L Front Panel View Cisco IE-2000-8TC-L Front Panel Cisco IE-2000-16TC-L Front Panel View Cisco IE-2000-16PTC-G-E Switch Front Panel View 10/100BASE-T Downlink Ports 100 Mb/s SFP Module Uplink Slots 10/100BASE-T Uplink Ports10/100/1000BASE-T Uplink Ports 100/1000 Mb/s SFP Module Uplink Slots Dual-Purpose Gigabit Ethernet Uplink Ports SFP ModulesType of SFP Module Model Power Connectors GLC-LH-SM Alarm Connector PoE Power Connector Management Ports USB Mini-Type B Port LEDs on the Cisco IE 2000 Switch LEDs Express Setup LED System LEDUSB-Mini Console LED Alarm LEDs Power Status LEDs Port Status LEDs Dual-Purpose Port LEDs Dual-Purpose Port LEDs Flash Memory Card PoE Status LEDColor PoE Status 10 Flash Memory Card Slot Rear Panel Management Options Network Configurations Switch Installation Preparing for Installation 140F 60C Statement Hazardous Area Installation Warnings 1080 Installation Guidelines North American Hazardous Location ApprovalEnvironment and Enclosure Guidelines General Guidelines Installing or Removing the Flash Memory Card Optional Verifying Package Contents Installing the Flash Memory Card in the Switch Connecting to a Console Port RJ-45 Console Port USB Mini-Type B Console Port Connecting the Console Cable RJ-45 Console Port USB Mini-Type B Console Port Removing the USB Mini-Type B Console Port Cover Choose Start Control Panel Systems Connecting to Power Supported Power SuppliesTools and Equipment Attachable? Grounding the SwitchDimensions Usage Slide the ground screw through the terminal Ground cable Connecting the Power Converter to an AC Power Source Preparing the AC Power Connection Connecting the AC Power Source to the Power Converter Connecting AC Power Connecting the Power Converter to a DC Power Source Wiring the DC Power Source Statement 12 Stripping the Power Connection Wire Label 14 Inserting Wires in the Power Connector 15 Torquing the Power Connector Captive Screws Attaching the Power Connectors to the Switch 16 Completed DC Power Connections on the Power Connectors 17 Attaching the Power Connectors to the Switch 18 Connecting the Power Connectors to the Switch Connecting Power to the Switch PoE DC-Input Optional 332021 Applying Power to the Power Converter Running Boot FastPowering On the Switch Installing the Switch Verifying Boot FastDisconnecting Power Installing the Switch on a DIN Rail DIN Rail Switch Removing the Switch from a DIN Rail Connecting Alarm Circuits Wiring the Protective Ground and DC Power for Alarm Circuits Wiring the External Alarms Label Connection 21 Removing the Alarm Connector 332225 Attaching the Alarm Connector to the Switch Connecting Destination Ports 25 Connecting the Alarm Connector to the Switch Connecting to 10/100 and 10/100/1000 Ports 26 Connecting to an Ethernet Port Installing and Removing SFP Modules Installing SFP Modules into SFP Module Slots 28 Installing an SFP Module into an SFP Module Slot Removing SFP Modules from SFP Module Slots Connecting to SFP Modules LC connector Connecting to a Dual-Purpose Port Verifying Switch Operation Where to Go Next Switch Installation Where to Go Next Diagnosing Problems Switch Boot Fast Bad or Damaged Cable Switch LEDsSwitch Connections Ethernet and Fiber-Optic Cables SFP Module Interface Settings10/100 and 10/100/1000 Port Connections Ping End Device Autonegotiation and Network Interface Cards Switch PerformanceSpeed, Duplex, and Autonegotiation Cabling Distance Resetting the Switch How to Recover Passwords Finding the Switch Serial Number Serial Number Location for the Cisco IE-2000 Switches Technical Specifications Operating Temperature Specifications Technical Specifications Power RequirementsEnvironmental Ranges Table A-2 Cisco IE 2000 Series Technical Specifications Physical Dimensions Table A-2 Cisco IE 2000 Series Technical Specifications Hazardous Locations Standards Alarm RatingsAlarm Ratings Specification Hazardous Locations Standards Connector Specifications 10/100 Ports SFP Module Connectors Dual-Purpose PortsConsole Port Alarm Port Figure B-5 USB Type A-to-USB 5-Pin Mini-Type B Cable Cables and Adapters SFP Module Cables Core Modal Wavelength Commercial SFPs MHz/km1 Cable Distance Extended temperature SFPs Bandwidth Type of SFP Module Nanometers Fiber Type Cable Pinouts TP3 Console Port Adapter Pinouts Figure B-9 Switch Console RJ-45-to-DB-25 Port DTE Adapter Device DSR DTR CTS RTS OL-25818-04 Accessing the CLI Through the Console Port Removing the USB Mini-Type B Console Port Cover Figure C-1 Removing the USB Mini-Type B Console Port Cover Figure C-2 Connecting the Console Cable Figure C-3 Connecting the USB-Mini Console Cable Installing the Cisco Microsoft Windows USB Device Driver Installing the Cisco Microsoft Windows XP USB Driver Installing the Cisco Microsoft Windows 2000 USB Driver Uninstalling the Cisco Microsoft Windows USB Driver Using the Add or Remove Programs Utility Entering the Initial Configuration Information IP SettingsCompleting the Setup Program Enter an enable password, and press Return These choices appear