Cisco Systems IE200016TCB, IE20004TSB manual Express Setup LED, System LED, USB-Mini Console LED

Chapter 1 Product Overview

Front Panel

Express Setup LED

The Express Setup LED displays the express setup mode for the initial configuration. Table 1-3lists the LED colors and their meanings.

Table 1-3	Setup LED
Color		Setup Status
Off (dark)		Switch is configured as a managed switch.
Solid green		Switch is operating normally.
Blinking green		Switch is in initial setup, in recovery, or initial setup is
		incomplete.
Solid red		Switch failed to start initial setup or recovery because
		there is no available switch port to which to connect the
		management station. Disconnect a device from a switch
		port, and then press the Express Setup button.

System LED

The System LED shows whether the system is receiving power and is functioning properly.

Table 1-4lists the system LED colors and their meanings.

Table 1-4	System LED
Color		System Status
Off		System is not powered on.
Blinking green		Boot fast is in progress.
Green		System is operating normally.
Red		Switch is not functioning properly.

USB-Mini Console LED

The USB-mini console LED shows which console port is in use. See Figure 1-8for the LED location.

If you connect a cable to a console port, the switch automatically uses that port for console communication. If you connect two console cables, the USB-mini console port has priority. Table 1-5describes the system LED colors and their meanings.

Table 1-5	USB-Mini Console Port LED
Color	Description
Green	USB-mini console port is active.
	RJ-45 console port LED is not active.
Off	Port is not active.
	RJ-45 console port is active.

	Cisco IE 2000 Switch Hardware Installation Guide
OL-25818-04		1-15