Chapter 1 Product Overview
Front Panel
Dual-Purpose Port LEDs
Figure 1-9 shows the LEDs on a dual-purpose port. You can configure each port as either a 10/100/1000BASE-T port through the RJ-45 connector or as an SFP module, but not both at the same time. The LEDs show how the port is being used (Ethernet or SFP module).
The LED colors have the same meanings as described in Table 1-9.
Figure 1-9 Dual-Purpose Port LEDs
332704
1
1
| Cisco IE 2000 Switch Hardware Installation Guide |
