Cisco Systems IE20004TSL, IE20004TSB, IE200016TCB manual Connecting Alarm Circuits

Chapter 2 Switch Installation

Connecting Alarm Circuits

Figure 2-20 Releasing the Spring-Loaded Latch from the DIN Rail

331953

1

1

Push latch down

Step 4 Remove the switch from the DIN rail.

Connecting Alarm Circuits

After the switch is installed, you are ready to connect the DC power and alarm connections.

•Wiring the Protective Ground and DC Power for Alarm Circuits, page 2-34

•Wiring the External Alarms, page 2-35

Wiring the Protective Ground and DC Power for Alarm Circuits

For instructions on grounding the switch and connecting the DC power, see the “Grounding the Switch” section on page 2-14.

	Cisco IE 2000 Switch Hardware Installation Guide
2-34	OL-25818-04