Cisco Systems IE20004TSL, IE20004TSB, IE200016TCB manual Figure C-2 Connecting the Console Cable

Appendix C Configuring the Switch with the CLI-Based Setup Program

Accessing the CLI Through the Console Port

Figure C-2 Connecting the Console Cable

1

0.5-3.0A

331563

16TC

1

RJ-45 console port

2

Console cable (RJ-45-to-DB-9 adapter cable)

Step 3 Configure the baud rate and character format of the PC or terminal to match the console port characteristics:

•9600 baud

•8 data bits

•1 stop bit

•No parity

•None (flow control)

Step 4 Connect power to the switch as described in Connecting to Power, page 2-13.

Step 5 The PC or terminal displays the bootloader sequence. Press Enter to display the setup prompt. Follow the steps in the “Completing the Setup Program” section on page C-8.

Cisco IE 2000 Switch Hardware Installation Guide

OL-25818-04 C-3