Cisco Systems XR 12410 manual Reinstalling Cards in the Chassis

Chapter 3 Installing the Cisco XR 12410 Router

Reinstalling Cards in the Chassis

Step 2 Go to the “Reinstalling Cards in the Switch Fabric and Alarm Card Cage” section on page 3-31 to reinstall SFCS cards.

Reinstalling Cards in the Chassis

This section describes how to reinstall various line cards back into the chassis.

Reinstalling Cards in the Switch Fabric and Alarm Card Cage

Use the following procedure to reinstall cards into the switch fabric and alarm card cage (refer to Figure 3-7for slot numbering).

Step 1 Loosen the two captive screws on each side of the air filter door and swing the door away from the switch fabric and alarm card cage (Figure 3-7).

Figure 3-23 Opening the Air Filter Door

ALARM

	S
2	FC

-3/STM-POS

6DS3–SMB	12DS3–SMB
P/H/F	P/H/F

-48/STM-16-SCPOS OC-12/STM-4 ATM

ST ETERNET E PROCESSOR PROCESSOR OCESSOR

53272

	Cisco XR 12410 Router Installation Guide
OL-13832-01		3-31