Cisco Systems XR 12410 manual Table A-2 AC Electrical Specifications

Appendix A Technical Specifications

Router Specifications

Table A-2	AC Electrical Specifications
Description		Value
Total AC Input Power		3000 VA (volt-amps) per AC power supply
		(2 AC power supplies per system)
Rated input voltage1		200–240 VAC nominal (range: 180 to 264 VAC)
		220–240 VAC (UK)
Rated input line frequency1		50/60 Hz nominal (range: 47 to 63 Hz)
		50/60 Hz UK
Input current rating1		15	A maximum @ 200 VAC
		13	A maximum @220 to 240 VRMS (UK)
Source AC service		20	A North America; 16 A international;
requirement1		13	A UK
Heat dissipation		2800 W@9,544 BTU/hour
(total maximum)
Redundancy		2 AC power supply modules required for 2N
		redundancy

1. For each AC power supply module.

Caution To ensure that the chassis configuration complies with the required power budgets, use the on-line power calculator. Failure to properly verify the configuration may result in an unpredictable state if one of the power units fails. Contact your local sales representative for assistance.

	Table A-3	DC Electrical Specifications
	Description		Value
	Total DC Input Power		2800 W per DC power entry module
	Rated input voltage1		–48 VDC nominal in North America
			–60 VDC nominal in the European Community
			(range: –40.5 to –72 VDC (–75 VDC FOR 5mS))
	Input current rating1		40 A maximum (2x)
			Cisco XR 12410 Router Installation Guide
OL-13832-01				A-3