Chapter 5 Maintaining the Router
Removing and Replacing the Blower Module
Removing and Replacing the Blower Module
Use the following procedure to remove and replace the blower module.
Step 1 Remove the blower module from the chassis (Figure
a.Loosen the captive screw on each side of the blower module.
b.Pull the blower module halfway out of the module bay.
c.Slide out the blower module completely from the module bay while supporting it with your other hand.
Warning The blower module weighs approximately 20 pounds (9 kg). Use two hands when handling the blower module.
Figure 5-5 Removing the Blower Module
0
A
C
T
TX | TX |
0 | 0 |
RX | RX |
TX | TX |
1 | 1 |
RX |
|
52643
|
| Cisco XR 12410 Router Installation Guide |
|
|
|
|
| ||
|
|
|
| |
|
|
|
