Chapter 3 Installing the Cisco XR 12410 Router

Pre-Installation Considerations and Requirements

Pre-Installation Considerations and Requirements

Before you perform any procedures in this chapter, review the following sections in Chapter 2, “Preparing for Installation.”

Safety Guidelines, page 2-2

Site Requirement Guidelines, page 2-6

In particular, observe the guidelines for preventing electrostatic discharge (ESD) damage described in the “Compliance and Safety Information” section on page 2-3and use Figure 2-1 on page 2-4as a reference in locating and using the ESD sockets on the front of the router chassis.

For additional safety and compliance information, refer to the Regulatory Compliance and Safety Information for Cisco 12000 Series Routers publication that accompanied your router.

Warning This router is not designed to be installed as a shelf-mounted or a free-standing router. The router must be installed in a rack that is secured to the building structure. You must install the router in either a telco-style frame or a four-post equipment rack.

 

Cisco XR 12410 Router Installation Guide

3-2

OL-13832-01

Page 78
Image 78
Cisco Systems XR 12410 manual Pre-Installation Considerations and Requirements