Cisco Systems XR 12410 manual OL-13832-01

Chapter 3 Installing the Cisco XR 12410 Router

Connecting Line Card Network Interface Cables

Step 6 Insert all cables into their assigned ports.

Step 7 Place several evenly spaced velcro straps through slots on the cable-management bracket (Figure 3-27a).

Step 8 Route the cables alongside the cable-management bracket and secure them with the velcro straps as appropriate (Figure 3-27b).

Caution Make sure the interface cables do not have any kinks or sharp bends which can destroy or degrade the ability of the optical fiber to propagate the signal-encoded beam of light accurately from one end of the cable to the other. Always allow adequate strain relief in the interface cable.

	Cisco XR 12410 Router Installation Guide
OL-13832-01		3-37