Cisco Systems XR 12410 manual Rack-Mounting the Router Chassis

Chapter 3 Installing the Cisco XR 12410 Router

Rack-Mounting the Router Chassis

Step 2 Starting at slot CSC0:

a.Pivot the ejector levers to unseat the card from the backplane connector (Figure 3-10).

b.Slide the card out of the slot and place it directly into an antistatic bag or other ESD-preventive container.

Figure 3-10 Removing a Card from the Switch Fabric and Alarm Card Cage

Clock scheduler card

ALARM		-3/STM-POS
		S
	2	FC

6DS3–SMB	12DS3–SMB
P/H/F	P/H/F

-48/STM-16-SCPOS OC-12/STM-4 ATM

ST ETERNET E PROCESSOR

53270

Air filter door

Step 3 Repeat Step 2 for each card.

Step 4 Close the air filter door and tighten the captive screws to prevent the door from opening during the chassis installation.

Rack-Mounting the Router Chassis

The router chassis can be installed in either a front-mounted position or a center-mounted position as shown in Figure 3-11.

	Cisco XR 12410 Router Installation Guide
OL-13832-01		3-15