Cisco Systems XR 12410 manual Reinstalling Components After Installing the Chassis

Contents

		Installing the Chassis in the Rack			3-23
		Supplemental Bonding and Grounding Connections						3-26
		Reinstalling Components After Installing the Chassis 3-27
		Reinstalling Power Supplies	3-27
		Reinstalling AC PEMs	3-28
		Reinstalling DC PEMs	3-29
		Reinstalling the Blower Module		3-30
		Reinstalling Cards in the Chassis 3-31
		Reinstalling Cards in the Switch Fabric and Alarm Card Cage 3-31
		Reinstalling Cards in the Line Card and RP Card Cage 3-33
		Connecting Line Card Network Interface Cables					3-34
		Connecting PRP Route Processor Cables				3-39
		Connecting to the PRP Console Port				3-40
		Connecting to the PRP Auxiliary Port				3-41
		Connecting to the PRP Ethernet Ports				3-41
		Connecting Alarm Display Card Cables			3-43
		Connecting Power to the Router	3-44
		Connecting Power to an AC-PoweredRouter					3-45
		Connecting Power to a DC-Powered Router					3-46
		Troubleshooting the Installation
C H A P T E R 4			4-1
		Troubleshooting Overview 4-2
		Troubleshooting Using a Subsystem Approach						4-2
		Normal Router Startup Sequence			4-3
		Identifying Startup Issues 4-4
		Troubleshooting the Power Subsystem			4-5
		Troubleshooting the AC-Input Power Subsystem						4-5
		Troubleshooting the DC-Input Power Subsystem						4-8
		Troubleshooting a DC PEM		4-10
	Cisco XR 12410 Router Installation Guide
viii								OL-13832-01