Chapter 1 Cisco XR 12410 Router Overview

Physical and Functional Description of Router

AC and DC Power Subsystems

A router ships as either an AC or DC powered system. Source power connects to power distribution units (PDUs) on the back of the chassis which route power to the power supplies, also referred to as power entry modules (PEMs).

Caution To ensure that the chassis configuration complies with the required power budgets, use the on-line power calculator. Failure to properly verify the configuration may result in an unpredictable state if one of the power units fails. Contact your local sales representative for assistance.

AC Power Entry Modules

An AC powered router consists of two AC PDUs and AC PEMs. AC power to the router is provided through power cords connected from AC power outlets to the PDUs on the chassis rear panel as shown in Figure 1-3.

Figure 1-3 AC PDU Connection

52645

 

 

Cisco XR 12410 Router Installation Guide

 

 

 

 

 

 

OL-13832-01

 

 

1-5

 

 

 

Page 19
Image 19
Cisco Systems XR 12410 manual AC and DC Power Subsystems, AC Power Entry Modules