Chapter 2 Preparing for Installation
Safety Guidelines
Safety Guidelines
Before you perform any procedure in this publication, you must review the safety guidelines in this section to avoid injuring yourself or damaging the equipment.
Note that the information in this section are guidelines and do not include every potentially hazardous situation. When you install a router, always use common sense and caution.
General Safety Guidelines
•Never attempt to lift an object that might be too heavy for you to lift by yourself.
•Always disconnect the power source and unplug all power cables before lifting, moving, or working on the router.
•Keep the work area clear and dust free during and after installation.
•Keep tools and router components away from walkways and equipment rack aisles.
•Do not wear loose clothing, jewelry (including rings and chains), or other items that could get caught in the router.
•Fasten your tie or scarf and sleeves.
•Cisco equipment operates safely when it is used in accordance with its electrical ratings and product usage instructions.
•Do not work alone if potentially hazardous conditions exist.
•Always unplug the power cables when performing maintenance or working on the router, unless the replacement part is hot swappable and designed for online insertion and removal (OIR).
•The installation of the router should be in compliance with national and local electrical codes: in the United States, National Fire Protection Association (NFPA) 70, United States National Electrical Code; in Canada, Canadian Electrical Code, part I, CSA C22.1; in other countries, International Electrotechnical Commission (IEC) 364, part 1 through part 7.
| Cisco XR 12410 Router Installation Guide |
|
