Cisco Systems XR 12410 manual Center-Mount Brackets

Chapter 3 Installing the Cisco XR 12410 Router

Rack-Mounting the Router Chassis

Step 2 Identify the orientation of the left and right center-mount brackets (Figure 3-14).

Figure 3-14 Center-Mount Brackets

Threaded holes to chassis

Open holes to rack

	53223
Left bracket	Right bracket

Step 3 Install the right center-mount bracket (Figure 3-15).

a.Align the bottom screw hole of the bracket with the marked screw hole at the bottom of the rack and finger tighten a screw in that hole.

b.Finger-tighten a second screw in the top hole of the bracket.

c.Finger- tighten three more screws in the middle of in the bracket.

d.Use a screwdriver to tighten all five screws securely.

Step 4 Repeat Step 3 for the left center-mount bracket.

Step 5 Use a level to verify that the tops of the two brackets are level, or use a measuring tape to verify that both brackets are the same distance from the top of the rack rails.

	Cisco XR 12410 Router Installation Guide
OL-13832-01		3-21