Clock scheduler card

Chapter 3 Installing the Cisco XR 12410 Router

Reinstalling Cards in the Chassis

Step 2 Starting at slot CSC0:

d.Slide the card into the slot (Figure 3-24).

a.Pivot the ejector levers to seat the card to the backplane connector.

Figure 3-24 Reinstalling a Clock Scheduler Card into the Switch Fabric and Alarm Card Cage

6DS3–SMB	12DS3–SMB
P/H/F	P/H/F

-48/STM-16-SCPOS

OC-12/STM-4 ATM

ST ETERNET

E PROCESSOR

53270

Air filter door

Step 3 Repeat Step 2 for each card.

Step 4 Close the air filter door and tighten the captive screws to prevent the door from opening during chassis installation.

Caution The air filter door must be closed and secured at all times to maintain correct EMI performance.

Step 5 Go to the “Reinstalling Cards in the Line Card and RP Card Cage” section on page 3-33 to reinstall the line cards and RP.

	Cisco XR 12410 Router Installation Guide
3-32	OL-13832-01