Cisco Systems XR 12410 manual Removing the Blower Module

Chapter 3 Installing the Cisco XR 12410 Router

Removing Components Before Installing the Chassis

Removing the Blower Module

By removing the blower module from the chassis, you can reduce the top-end weight of the chassis by approximately 20.5 pounds (9.3 kg).

Use the following procedure to remove the blower module from the chassis (Figure 3-6).

Step 1 Loosen the captive screw on each side of the blower module.

Step 2 Pull the blower module halfway out of the module bay.

Step 3 Slide out the blower module completely from the module bay while supporting it with your other hand.

Warning The blower module weighs approximately 20 pounds (9 kg). Use two hands when handling the blower module.

	Cisco XR 12410 Router Installation Guide
OL-13832-01		3-9