106 |
|
|
|
|
| Appendices ~ Appendix E: Serial Commands | |||
|
|
|
| ||||||
|
|
|
|
|
|
|
|
|
|
| Command |
| Function |
| Command |
| Function | ||
|
|
|
| ||||||
|
|
|
|
|
|
|
|
| |
| MLINE |
| Selects/reports coarse gain adjustments on |
| RING |
| Indicates a ringing line (reportable only) | ||
|
|
|
| Inputs |
| RINGER |
| Sets the audible ringer for a telco channel | |
| MMAX |
| Selects/reports max # of mics for each mic |
| RINGERLVL |
| Sets the audible ring indication level | ||
|
|
|
| group |
| RXBOOST |
| Sets the receive boost at 0,3,6,9, or 12dB | |
| MPASS |
| Sets passcode setting when using modem |
| RXBSTEN |
| Enables/disables receive boost | ||
|
|
|
| mode |
| RXRD |
| Sets the RX reduction for the telco channel | |
| MTRX |
| Selects/reports matrix routing of an in. to out. |
| SERECHO |
| Selects/reports the serial echo of the | ||
| MTRXLVL |
| Selects/reports matrix level at the cross point |
| SERMODE |
| Selects/reports the serial mode of the | ||
| MUTE |
| Sets/reports mute status |
| SIGGEN |
| Selects/reports signal generator activation | ||
| NCD |
| Selects/reports noise cancellation amount for |
| SIGTOUT |
| Sets the signal generator time out for the unit | ||
|
|
|
| each mic channel |
| SLVL |
| Selects/reports mic auto level setting | |
| NCSEL |
| Selects/reports noise cancellation on/off for |
| SPEEDDIAL |
| Dials one of ten numbers on the telco channel | ||
|
|
|
| each mic channel |
| STOREDIAL |
| Saves a number in speed dial or reports the | |
| NLP |
| Selects/reports NLP for each mic channel |
|
|
| current value | ||
| NOM |
| Selects/reports NOM setting on output |
| STRING |
| Executes a string for the | ||
|
|
|
| channels |
| SFTYMUTE |
| Selects/reports the state of the safety mute. | |
| NULL |
| Renulls the XAP 400 to the telephone line |
|
|
| When on, the safety mute holds all outputs in a | ||
| OFFA |
| Selects/reports off attenuation mode for |
|
|
| muted state. | ||
|
|
|
| inputs |
| TAMODE |
| Sets the telco adapt mode for the telco | |
| PAA |
| Selects PA adapt mode for specified input |
|
|
| channel | ||
| PP |
| Selects/reports phantom power setting |
| TE |
| Sets the telco enable for the telco channel | ||
| PRESET |
| Executes preset or report last executed preset |
| TERL |
| Reports the telco echo return loss (read only) | ||
| PRGSTRING |
| Sets/reports a programmed string |
| TERLE |
| Reports the telco echo return loss | ||
| RAMP |
| Start/stops the gain ramp for an input, output, |
|
|
| enhancement (read only) | ||
|
|
|
| or assignable processing block |
| TOUT |
| Selects/reports the title screen inactivity time | |
| REDIAL |
| Redials the last number |
|
|
| out | ||
| REFSEL |
| Selects/reports PA adapt mode for mic |
| UID |
| Reports unit ID (read only) | ||
|
|
|
| outputs |
| VER |
| Reports unit version (read only) | |
| REFSET |
| Selects/reports the output the reference channel |
|
|
|
| ||
|
|
|
| tracks |
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
Technical Services Group ~
