ClearOne comm XAP 400 Adding a XAP, To auto-detect units, To manually add units, File menu

24			System Configuration ~ Site Setup
		Adding a XAP 400
		You can add a XAP 400(s) to your site file by connecting to your site and using
		G-Ware to automatically create icons for the detected units. Or, you can work offline
		and manually add the unit(s) to the site file and connect to the site at a later time.
		To open an existing site file, click the Open Site File button or select Open Site from
	Figure 3.6. Open	the File menu.
	Site File button

Figure 3.7.

Connect button

Figure 3.9. Add Unit to Current Site button

To auto-detect units

1.Click the Connect button on the G-Ware toolbar or select Connect from the Connect Menu.

2.Choose Sync to Unit(s). G-Ware will automatically create icons for the new units it detects on the network and place them in the Site pane. See Figure 3.11.

Figure 3.8. Connection choices

Note: When connecting to your site, you can choose to sync to Unit(s) or Document. If you sync to the Unit(s), you will overwrite your G-Ware site file with the current settings of the unit(s). If you sync to the Document, you will overwrite the settings in your units with the settings you have saved in the site file. Choosing to sync to Document will also create icons for any new units.

To manually add units

1.If you are working offline, click the Add button on the G-Ware toolbar. This opens the Add Unit window.

Figure 3.10. Add Unit window

2.Select the XAP 400 icon and click Add.

Technical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760