ClearOne comm XAP 400 Creating floppy disk copies, Installing G-Ware, To install G-Ware

22

✍	You can also access the
	Disk Copy program from
	the G-Ware install menu

which is located on the AV Products CD (exefiles\gware\setup.exe).

System Configuration ~ Installing G-Ware

Creating floppy disk copies

Depending upon the computer equipment you have available, you might need to install G-Ware software from floppy disks rather than the included CD. To do this, a Disk Copy program is provided in G-Ware that allows you to transfer G-Ware to floppy disks. You will need a PC with a CD-ROM drive to make the transfer. After installing G-Ware on the CD-ROM-equipped computer, you can access the Disk Copy program in the following way:

•From the Windows Start menu, select Programs, ClearOne G-Ware, and then Create Install Floppy Disks. Follow the onscreen prompts to complete creation of the floppy disks.

✍ To select an alternate destination directory, click Browse and use the Choose

Directory window to find the desired location. Click OK to return to the previous window.

Figure 3.1. Desktop icon

Installing G-Ware

To install G-Ware

1.Boot the PC to the Windows operating system. Ensure that all other programs or applications are closed. Insert the Audio and Video Products CD into the CD-ROM drive.

If the Autorun feature is enabled on the PC, the ClearOne Welcome window opens. Click the Software tab and select G-Ware.

If the Autorun window does not open, open the Windows Start menu and choose Run. Type “<drive>:\\gentner.exe” where <drive> is the letter of the CD-ROM drive (e.g., D:\\gentner.exe).

2.At the G-Ware window, click Install G-Warenear the bottom of the window.

3.The InstallShield Wizard opens, and guides you through the Welcome and License Agreement windows. At the Choose Destination Location window, choose the directory where G-Ware will be installed. We recommend that you use the default directory.

4.Click Next or Yes to move to proceed through the windows that follow or No or Cancel to end the installation process.

5.Follow the onscreen instructions. You must restart your computer once installation is complete.

The G-Ware Program Folder is now added to your Start menu. You can start G-Ware through the Start menu or by double-clicking the desktop icon.

Technical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760