Compaq AA-RHGWC-TE manual P00 set mode diag

AS8x00, GS60, GS60E, and GS140. Set the console to diagnostic mode as follows:

P00>>> set mode diag

Console is in diagnostic mode

P00>>>

The console remains in wwid manager mode (or diagnostic mode for the AS1200, AS4x00, AS8x00, GS60, GS60E, and GS140 systems), and you cannot boot until the system is re-initialized. Use the init command or a system reset to re-initialize the system after you have completed using the wwid manager.

If you try to boot the system and receive the following error, initialize the console to get out of WWID manager mode, then reboot:

P00>>> boot

warning -- main memory zone is not free P00>>> init

.

.

.

P00>>> boot

If you have initialized and booted the system, then shut down the system and try to use the wwidmgr utility, you may be prevented from doing so. If you receive the following error, initialize the system and retry the wwidmgr command:

P00>>> wwidmgr -show adapter

wwidmgr available only prior to booting. Reinit system and try again.

P00>>> init

.

.

.

P00>>> wwidmgr -show adapter

.

.

.

For more information on the wwidmgr utility, see the Wwidmgr User’s Manual, which is on the Alpha Systems Firmware Update CD-ROM in the DOC directory.

Use the worldwide ID manager to show all KGPSA adapters:

P00>>> wwidmgr -show		adapter
Link is down.
item	adapter	WWN	Cur. Topo	Next Topo
pga0.0.0.3.1 - Nvram		read failed
[ 0]	pga0.0.0.3.1	1000-0000-c920-eda0	FABRIC	UNAVAIL
pgb0.0.0.4.0 - Nvram		read failed
[ 1]	pgb0.0.0.4.0	1000-0000-c920-da01	FABRIC	UNAVAIL
pgc0.0.0.5.1 - Nvram		read failed.
[ 2]	pgc0.0.0.5.1	1000-0000-c920-cd9c	FABRIC	UNAVAIL

[9999] All of the above.

Using Fibre Channel Storage 6–25