
_____________________ Note _____________________
You may have problems if the member system supports the bus_probe_algorithm console variable and it is not set to new. See Section 2.3.2.
The KZPBA-CB UltraSCSI host adapter:
•Is a high-performance PCI option connecting the PCI-based host system to the devices on a 16-bit, ultrawide differential SCSI bus.
•Is a single-channel, ultrawide differential adapter.
•Operates at the following speeds:
–5 MB/sec narrow SCSI at slow speed
–10 MB/sec narrow SCSI at fast speed
–20 MB/sec wide differential SCSI
–40 MB/sec wide differential UltraSCSI
______________________ Note _______________________
Even though the KZPBA-CB is an UltraSCSI device, it has an HD68 connector.
Use the steps in Table 10–2 to set up a KZPSA-BB or KZPBA-CB host bus adapter for a TruCluster Server cluster that uses radial connection to a DWZZH UltraSCSI hub with an HSZ40 or HSZ50 RAID array controller.
Table 10–2: Installing the KZPSA-BB or KZPBA-CB for Radial Connection to a DWZZH UltraSCSI Hub
Step | Action | Refer to: |
1 | Ensure that the KZPSA-BB internal termination | Section 10.1.4.4, |
| resistors, Z1, Z2, Z3, Z4, and Z5 are installed. | Figure 10–1, and KZPSA |
| | PCI-to-SCSI Storage |
| | Adapter Installation |
| | and User’s Guide |
| Ensure that the eight KZPBA-CB internal | Section 4.3.3.3, |
| termination resistor SIPs, RM1-RM8 are installed. | Figure 4–1, and |
KZPBA-CB PCI-to-Ultra
SCSI Differential Host
Adapter User’s Guide
10–4Configuring Systems for External Termination or Radial Connections to Non-UltraSCSI Devices