Compaq AA-RHGWC-TE manual CPU3/SROM

Example 7–4: Displaying Console Serial Bus Information (cont.)

C3	CPU3/SROM	V5.0-7				ON
C0	IOR0					ON
C1	IOR1					ON
31	PSM	T05.4	(03.24/01:09)	T4.0	(07.06)	ON	SrvSw: NORMAL
31	XSROM	T05.4	(03.24/02:10)
C4	CPU0/SROM	V5.0-7				ON
C5	CPU1/SROM	V5.0-7				ON
C6	CPU2/SROM	V5.0-7				ON
C7	CPU3/SROM	V5.0-7				ON
32	PSM	T05.4	(03.24/01:09)	T4.0	(07.06)	ON	SrvSw: NORMAL
32	XSROM	T05.4	(03.24/02:10)
C8	CPU0/SROM	V5.0-7				ON
C9	CPU1/SROM	V5.0-7				ON
CA	CPU2/SROM	V5.0-7				ON
CB	CPU3/SROM	V5.0-7				ON
C8	IOR0					ON
C9	IOR1					ON
33	PSM	T05.4	(03.24/01:09)	T4.0	(07.06)	ON	SrvSw: NORMAL
33	XSROM	T05.4	(03.24/02:10)
CC	CPU0/SROM	V5.0-7				ON
CD	CPU1/SROM	V5.0-7				ON
CE	CPU2/SROM	V5.0-7				ON
CF	CPU3/SROM	V5.0-7				ON
40	HPM	T05.4	(03.24/01:18)	X4.1	(08.18)	ON
E0	SCM MASTER	T05.4	(03.24/01:21)	T4.2	(09.08)	ON
E1	SCM SLAVE	T05.4	(03.24/01:21)	T4.2	(09.08)	ON	Ineligible

1

2

The console serial bus (CSB) node ID, or in the case of a QBB, the CPU number in the QBB. The CSB node address ranges are as follows:

•10 to 1f: PCI backplane manager (PBM) — The CSB node ID is based on the PCI drawer node ID setting.

•e0 to e7: System control manager (SCM) — The CSB node ID is also based on the PCI drawer node ID setting.

•30 to 37: Power system manager (PSM) — Based on the hard QBB ID (QBB 0 - 7)

•40: Hierarchical switch power manager (HPM)

•C0 to CF: In response to the SCM show csb command, the PSM provides CSB node addresses for the CPUs and I/O risers even though they are not on the console serial bus. This enables SCM commands to be directed at any specific CPU, for instance power off -cpu c4. The PSM responds to SCM commands and powers the CPU on or off.

The type of CSB node:

•PBM (PCI backplane manager)

•PSM (Power system manager)

•HPM (Hierarchical switch power manager)

Using GS80, GS160, or GS320 Hard Partitions in a TruCluster Server Configuration 7–17