____________________ Note _____________________

Pressing the down button selects the next lower top-level menu. The top-level menus are:

Configuration Menu

Operation Menu

Status Menu

Test Menu

2.Press Enter to display the first submenu item in the configuration menu, Ethernet IP address:

Ethernet IP address: 10.00.00.10

--

The underline cursor denotes the selected address field.

Use the up or down button to increase or decrease the displayed number. Use the Tab/Esc button to select the next field. Modify the address fields until you have the address set correctly.

3.Use Enter to accept the value and step to the next submenu item (Ethernet Submask), and then repeat step 2 to set the Ethernet subnet mask.

4.Press Enter to accept the Ethernet subnet mask.

5.Press the Tab/Esc button repeatedly to get back to the top-level menu.

6.Press the down button to select the Operation Menu:

Select Menu: Operation Menu

7.If the switch is operational, place the switch off line before rebooting or you will lose any transmission in progress.

Press Enter to display the first submenu in the Operation Menu, Switch Offline:

Operation Menu: Switch Offline

8.Press the down button until the Reboot submenu item is displayed:

Operation Menu: Reboot

9.Press Enter. You can change your mind and not reboot:

Reboot

Accept? Yes No

6–20Using Fibre Channel Storage

Page 146
Image 146
Compaq AA-RHGWC-TE manual Press Enter. You can change your mind and not reboot