The boot sequence provides firmware update overview information. Use Return to scroll the text, or press Ctrl/C to skip the text.

After the overview information has been displayed, the name of the default boot file is provided. If it is the correct boot file, press Return at the Bootfile: prompt. Otherwise, enter the name of the file you wish to boot from.

The firmware images are copied from the CD-ROM and the LFU help message shown in the following example is displayed:

*****Loadable Firmware Update Utility*****

-------------------------------------------------------------

Function Description

-------------------------------------------------------------

Display

Displays the system’s configuration table.

Exit

Done exit LFU (reset).

List

Lists the device, revision, firmware name and

 

update revision

Readme

Lists important release information.

Update

Replaces current firmware with loadable data

 

image.

Verify

Compares loadable and hardware images.

? or Help

Scrolls this function table.

The list command indicates, in the device column, which devices it can update.

Use the update command to update all firmware, or you can designate a specific device to update; for example, KZPSA-BB pkb0:

UPD> update pkb0

After updating the firmware and verifying this with the verify command, reset the system by cycling the power.

Configuring Systems for External Termination or Radial Connections to Non-UltraSCSI Devices 10–19

Page 343
Image 343
Compaq AA-RHGWC-TE manual UPD update pkb0