Compaq AA-RHGWC-TE manual P00show pk

10.1.4Displaying Console Environment Variables and Setting the KZPSA-BB and KZPBA-CB SCSI ID

The following sections show how to use the show console command to display the pk* and isp* console environment variables and set the KZPSA-BB and KZPBA-CB SCSI ID on various AlphaServer systems. Use these examples as guides for your system.

Note that the console environment variables used for the SCSI options vary from system to system. Also, a class of environment variables (for example, pk* or isp*) may show both internal and external options.

Compare the following examples with the devices shown in the show config and show dev examples to determine which devices are KZPSA-BBs or KZPBA-CBs on the shared SCSI bus.

10.1.4.1Displaying KZPSA-BB and KZPBA-CB pk* or isp* Console Environment Variables

To determine the console environment variables to use, execute the show pk* and show isp* console commands.

Example 10–5 shows the pk console environment variables for an AlphaServer 4100.

Example 10–5: Displaying the pk* Console Environment Variables on an AlphaServer 4100 System

P00>>>show pk*

pka0_disconnect 1

pka0_fast1

pka0_host_id7

pkb0_disconnect 1

pkb0_fast1

pkb0_host_id7

pkc0_host_id7

pkc0_soft_termdiff

pkd0_host_id7

pkd0_soft_termon

pke0_fast pke0_host_id pke0_termpwr

1

7

1

Configuring Systems for External Termination or Radial Connections to Non-UltraSCSI Devices 10–13