Compaq AA-RHGWC-TE manual P00 show isp

Example 10–6: Displaying Console Variables for a KZPBA-CB on an AlphaServer 8x00 System

P00>>> show isp*

isp0_host_id 7

isp0_soft_term on

isp1_host_id 7

isp1_soft_term on

isp2_host_id 7

isp2_soft_term on

isp3_host_id 7

isp3_soft_term on

isp5_host_id 7

isp5_soft_term diff

Both Example 10–3 and Example 10–4 show five isp devices; isp0, isp1, isp2, isp3, and isp4. In Example 10–6, the show isp* console command shows isp0, isp1, isp2, isp3, and isp5.

The console code that assigns console environment variables counts every I/O adapter including the KZPAA, which is the device after isp3, and therefore logically isp4 in the numbering scheme. The show isp console command skips over isp4 because the KZPAA is not a QLogic 1020/1040 class module.

Example 10–3 and Example 10–4 show that isp0, isp1, isp2, and isp3 are on the internal KFTIA PCI bus and not on a shared SCSI bus. Only isp5, the KZPBA-CB, is on a shared SCSI bus. The other three shared SCSI buses use KZPSA-BBs.

Example 10–7 shows the use of the show pk console command to display the console environment variables for KZPSA-BBs on an AlphaServer 8x00.

Example 10–7: Displaying Console Variables for a KZPSA-BB on an AlphaServer 8x00 System

P00>>> show pk*

pka0_fast 1

pka0_host_id 7

pka0_termpwr on

pkb0_fast pkb0_host_id pkb0_termpwr

1

7 on

Configuring Systems for External Termination or Radial Connections to Non-UltraSCSI Devices 10–15