Compaq AA-RHGWC-TE manual 16 TL896 Six-Bus Configuration

–The lower bay bottom shelf tape drive (tape drive 0, SCSI ID 3) is on SCSI Port C and is terminated on the tape drive.

–The tape drive terminators are 68-pin differential terminators (part number 0415619).

Figure 8–16: TL896 Six-Bus Configuration

0415498 (50-Pin Micro-D

0425031 (SCSI Diff Feed Through)

0425017 (Cable)

MUC

SCSI Address 2

		-01
	TZ89 Drive 5		6204099
	SCSI Address 5
	(top shelf)	-01
	TZ89 Drive 4		6204099
Upper
	SCSI Address 4
Bay
	(middle shelf)
		-01
	TZ89 Drive 3	6204099
	SCSI Address 3
	(bottom shelf)
		-01
	TZ89 Drive 2		6204099
	SCSI Address 5
	(top shelf)	-01
	TZ89 Drive 1		6204099
Lower
	SCSI Address 4
Bay	(middle shelf)
		-01
	TZ89 Drive 0	6204099
	SCSI Address 3
	(bottom shelf)

0415619

(68-pin Terminator)

0415619

(68-pin Terminator)

0415619

(68-pin Terminator)

0415619

(68-pin Terminator)

0415619

(68-pin Terminator)

SCSI Port A	SCSI Port D	SCSI Port G
(Rear Connector Panel)
SCSI Port B	SCSI Port E	SCSI Port H
SCSI Port C	SCSI Port F	SCSI Port I

ZK-1327U-AI

8.11.6Connecting the TL893 and TL896 Automated Tape Libraries to the Shared SCSI Bus

The TL893 and TL896 Automated Tape Libraries (ATLs) have up to 3 meters of internal SCSI cabling on each SCSI bus. Because of the internal SCSI cable lengths, it is not possible to use a trilink connector or Y cable to terminate the SCSI bus external to the library as is done with other devices

8–54Configuring a Shared SCSI Bus for Tape Drive Use