Compaq AA-RHGWC-TE manual Upgrading a TL895, 14 TL895 Tape Library Internal Cabling

Figure 8–14: TL895 Tape Library Internal Cabling

Robotics

Controller

SCSI ID 0

Tape Drive 0

SCSI ID 1

Tape Drive 1

SCSI ID 2

Tape Drive 2

SCSI ID 3

Tape Drive 3

SCSI ID 4

Tape Drive 4

SCSI ID 5

Tape Drive 5

SCSI ID 1

Tape Drive 6

SCSI ID 2

Terminator

PN 0415619

	SCSI Jumper Cable	SCSI Port 8
	PN 6210567
		SCSI Port 7
Terminator
		SCSI Port 6
	Jumper	SCSI Port 5
	Cable	SCSI Port 4
Terminator		SCSI Port 3
		SCSI Port 2
	Jumper
	Cable	SCSI Port 1
Terminator

ZK-1397U-AI

8.10.4 Upgrading a TL895

The TL985 DLT automated tape library can be upgraded from two or five tape drives to seven drives with multiple DS-TL89X-UA upgrade kits. Besides the associated documentation, the upgrade kit contains one TZ89N-AV tape drive, a SCSI bus terminator, a SCSI bus jumper (part number 6210567) so you can place more than one drive on the same SCSI bus, and other associated hardware.

Before the drive is physically installed, set the SCSI ID rotary switches (on the library printed circuit board) to the same SCSI ID that will be electronically set. After the drive installation is complete, set the

Configuring a Shared SCSI Bus for Tape Drive Use 8–47