Compaq AA-RHGWC-TE manual Set the hard partitions back to the original configuration

___________________ Caution ___________________

Do not abort the update — doing so can cause a corrupt flash image in a firmware module.

A complete firmware update takes a long time. The length of time increases proportionally to the number of PCI adapters you have.

9.After you update the firmware, use the verify command to verify the firmware update, then transfer control back to the SCM and reset the system:

P00>>> Esc Esc SCM_E0> reset

scm

10.Set the hard partitions back to the original configuration:

SCM_E0> set hp_count 2

11.At the master SCM, turn system power on:

SCM_E0> power on

12.At the master SCM, transfer control to the SRM. Then, using the SRM at the console of each partition, boot the operating system.

Using GS80, GS160, or GS320 Hard Partitions in a TruCluster Server Configuration 7–21