Compaq AA-RHGWC-TE manual 2.2

6.2.2.2	Fabric	6–7
6.2.2.3	Arbitrated Loop Topology	6–8
6.3	Example Fibre Channel Configurations Supported by
	TruCluster Server	6–9

6.3.1Fibre Channel Cluster Configurations for Transparent

Failover Mode 6–10

6.3.2Fibre Channel Cluster Configurations for Multiple-Bus

		Failover Mode	6–11
6.4	Zoning and Cascaded Switches		6–14
6.4.1		Zoning	6–14
6.4.2		Cascaded Switches	6–15
6.5	Installing and Configuring Fibre Channel Hardware		6–16
6.5.1		Installing and Setting Up the Fibre Channel Switch	6–16
6.5.1.1		Installing the Switch	6–17
6.5.1.2		Managing the Fibre Channel Switches	6–18
6.5.1.2.1		Using the Switch Front Panel	6–19

6.5.1.2.2Setting the Ethernet IP Address and Subnet Mask

from the Front Panel 6–19

6.5.1.2.3Setting the DS-DSGGB-AA and DS-DSGGC-AA Ethernet IP Address and Subnet Mask from a PC

	or Terminal	6–21
6.5.1.2.4	Logging In to the Switch with a Telnet Connection	6–22
6.5.1.2.5	Setting the Switch Name via Telnet Session	6–23
6.5.2	Installing and Configuring the KGPSA PCI-to-Fibre
	Channel Adapter Module	6–23

6.5.2.1Installing the KGPSA PCI-to-Fibre Channel Adapter

Module ........................................................ 6–23

6.5.2.2Setting the KGPSA-BC or KGPSA-CA to Run on a

	Fabric	6–24
6.5.2.3	Obtaining the Worldwide Names of KGPSA Adapters	6–27
6.5.3	Setting Up the HSG80 Array Controller for Tru64 UNIX
	Installation	6–28
6.5.3.1	Obtaining the Worldwide Names of HSG80 Controller	6–33
6.6	Installing Tru64 UNIX and TruCluster Server Software Using
	Fibre Channel Storage	6–34
6.6.1	Before You Install	6–36
6.6.1.1	Configure the HSG80 Storagesets	6–36
6.6.1.2	Adding Units and Identifiers to the HSG80
	Storagesets	6–40
6.6.1.3	Set the Device Unit Number	6–43
6.6.1.4	Displaying the Available Boot Devices	6–48
6.6.1.5	Set the bootdef_dev Console Environment Variable for
	Tru64 UNIX Installation	6–49

vi Contents