Compaq AA-RHGWC-TE manual Add Additional Systems to the Cluster

or wwidmgr -show reachability). You must initialize the system to use any of the device names in the bootdef_dev variable as follows:

P00>>> set bootdef_dev \ dga131.1001.0.1.0,dga131.1004.0.1.0,\ dgb131.1002.0.2.0,dgb131.1003.0.2.0

POO>>> init

______________________ Note _______________________

The console system reference manual (SRM) software guarantees that you can set the bootdef_dev console environment variable to a minimum of four device names. You may be able to set it to five, but four is all that is guaranteed.

6.6.7 Add Additional Systems to the Cluster

To add additional systems to the cluster, follow this procedure:

1.On the system where you installed the Tru64 UNIX operating system, boot the system into the cluster (single-member cluster), and referring to the TruCluster Server Software Installation procedures, use clu_add_member to add subsequent cluster members.

Before you boot the system being added to the cluster, on the newly added cluster member:

a.Use the wwidmgr utility with the -quicksetoption to set the device unit number for the member system boot disk as shown in Example 6–7. For member system 2 in the example configuration, it is the storage unit with UDID 132 (see Table 6–2):

Example 6–7: Setting Device Unit Number for Additional Member System

P00>>> wwidmgr -quickset -udid 132

Disk assignment and reachability after next initialization:

6000-1fe1-0000-0d60-0009-8080-0434-0030
	via adapter:	via fc nport:	connected:
dga132.1001.0.1.0	pga0.0.0.1.0	5000-1fe1-0000-0d64	No
dga132.1002.0.1.0	pga0.0.0.1.0	5000-1fe1-0000-0d62	Yes
dga132.1003.0.1.0	pga0.0.0.1.0	5000-1fe1-0000-0d63	No
dga132.1004.0.1.0	pga0.0.0.1.0	5000-1fe1-0000-0d61	Yes
dgb132.1001.0.2.0	pgb0.0.0.2.0	5000-1fe1-0000-0d64	No
dgb132.1002.0.2.0	pgb0.0.0.2.0	5000-1fe1-0000-0d62	Yes
dgb132.1003.0.2.0	pgb0.0.0.2.0	5000-1fe1-0000-0d63	No
dgb132.1004.0.2.0	pgb0.0.0.2.0	5000-1fe1-0000-0d61	Yes

P00>>> init

Using Fibre Channel Storage 6–55