Compaq AA-RHGWC-TE manual Compaq ESL9326D Enterprise Library, General Overview

•DLT3 Bus ID: 4

•DLT4 Bus ID: 5

•DLT5 Bus ID: 6

7.Press Enter when you have the item selected for which you wish to change the SCSI ID.

8.Use the up and down arrows to select the desired SCSI ID. Press the Enter button to save the new selection.

9.Press the Escape button once to return to the Set SCSI Submenu to select another tape drive or the library robotics, and then repeat steps 6, 7, and 8 to set the SCSI ID.

10.If there are other items you wish to configure, press the Escape button until the Configure submenu is displayed, then select the item to be configured. Repeat this procedure for each item you wish to configure.

11.If there are no more items to be configured, press the Escape button until the Default window is displayed.

______________________ Note _______________________

You do not have to cycle power to set the SCSI IDs.

8.13 Compaq ESL9326D Enterprise Library

The topics in this section provide an overview and hardware configuration information on preparing the ESL9326D Enterprise Library for use on a shared SCSI bus with the TruCluster Server.

8.13.1 General Overview

The Compaq StorageWorks ESL9326D Enterprise Library is the first building block of the Compaq ESL 9000 series tape library.

For more information on the ESL9326D Enterprise Library, see the following Compaq StorageWorks ESL9000 Series Tape Library documentation:

•Unpacking and Installation Guide

•Reference Guide

•Maintenance and Service Guide

•Tape Drive Upgrade Guide

Configuring a Shared SCSI Bus for Tape Drive Use 8–73