Compaq AA-RHGWC-TE manual Configuring a Shared Scsi Bus for Tape Drive Use

6.6.2	Install the Tru64 UNIX Operating System	6–51
6.6.3	Determining /dev/disk/dskn to Use for a Cluster
	Installation	6–51
6.6.4	Label the Disks to Be Used to Create the Cluster	6–53
6.6.5	Install the TruCluster Server Software and Create the
	First Cluster Member	6–53
6.6.6	Reset the bootdef_dev Console Environment Variable	6–53
6.6.7	Add Additional Systems to the Cluster	6–55
6.7	Converting the HSG80 from Transparent to Multiple-Bus
	Failover Mode	6–57
6.7.1	Overview	6–58
6.7.2	Procedure to Convert from Transparent to Multiple-bus
	Failover Mode	6–59

6.8Using the emx Manager to Display Fibre Channel Adapter

Information ............................................................ 6–62

6.8.1Using the emxmgr Utility to Display Fibre Channel

	Adapter Information	6–62
6.8.2	Using the emxmgr Utility Interactively	6–65

7Using GS80, GS160, or GS320 Hard Partitions in a TruCluster Server Configuration

7.1	Overview	7–1
7.2	Hardware Requirements for a Hard Partition in a Cluster ....	7–2

7.3Configuring Partitioned GS80, GS160, or GS320 Systems in a

TruCluster Configuration 7–7

7.3.1Repartitioning a Single-Partition AlphaServer

GS80/160/320 as Two Partitions in a Cluster 7–7

7.4Determining AlphaServer GS80/160/320 System

	Configuration	7–14
7.5	Updating GS80/160/320 Firmware	7–18
7.5.1	Updating AlphaServer GS80/160/320 Firmware	7–18

8 Configuring a Shared SCSI Bus for Tape Drive Use

8.1	Preparing the TZ88 for Shared Bus Usage	8–1
8.1.1	Setting the TZ88N-VA SCSI ID	8–2
8.1.2	Cabling the TZ88N-VA	8–3
8.1.3	Setting the TZ88N-TA SCSI ID	8–5
8.1.4	Cabling the TZ88N-TA	8–5
8.2	Preparing the TZ89 for Shared SCSI Usage	8–6
8.2.1	Setting the DS-TZ89N-VW SCSI ID	8–6

Contents vii