Compaq AA-RHGWC-TE manual Cabling a Shared Scsi Bus with a TZ887

length is not exceeded and there are sufficient SCSI IDs available. Ensure that the tape drive on the end of the bus is terminated with an H8574-A or H8890-AA terminator.

You can add additional shared SCSI buses with TZ887 tape drives by adding additional DWZZB-AA/TZ887 combinations.

______________________ Note _______________________

Ensure that there is no conflict with tape drive and host bus adapter SCSI IDs.

Figure 8–9: Cabling a Shared SCSI Bus with a TZ887

Network

Member	Memory		Member
System			System
	Channel
1	Interface		2
Memory Channel	T 6		Memory Channel
KZPBA-CB (ID 6)		5	KZPBA-CB (ID 7)	5

T	KZPBA-CB (ID 6)			T	KZPBA-CB (ID 7)
					7
	1	1
	T	DS-DWZZH-03			+
	T				-
					0
	T			10
	2	3
		T	4
					TZ887

Controller B	Controller A
HSZ70	HSZ70

StorageWorks

RAID Array 7000

7

T	T	6
9		8

DWZZB-AA

ZK-1759U-AI

Table 8–6 shows the components used to create the cluster shown in Figure 8–9.

8–22Configuring a Shared SCSI Bus for Tape Drive Use