Compaq AA-RHGWC-TE manual Tables

9–15	TruCluster Server Cluster Using KZPSA-BB SCSI Adapters,
	a DS-DWZZH-05 UltraSCSI Hub, and an HSZ50 RAID Array
	Controller	9–31
10–1	KZPSA-BB Termination Resistors	10–18

Tables

2–1	RAID Controller Minimum Required Array Controller
	Software	2–10
2–2	RAID Controller SCSI IDs	2–10
2–3	Supported SCSI Cables	2–13
2–4	Supported SCSI Terminators and Trilink Connectors	2–14
3–1	SCSI Bus Speeds	3–5
3–2	SCSI Bus Segment Length	3–6
3–3	DS-DWZZH UltraSCSI Hub Maximum Configurations	3–11
3–4	Hardware Components Used in Configuration Shown in
	Figure 3–5 Through Figure 3–8	3–21
4–1	Planning Your Configuration	4–3
4–2	Configuring TruCluster Server Hardware	4–6
4–3	Installing the KZPBA-CB for Radial Connection to a DWZZH
	UltraSCSI Hub	4–9
5–1	MC1 and MC1.5 Jumper Configuration	5–2
5–2	MC2 Jumper Configuration	5–4
5–3	MC2 Linecard Jumper Configurations	5–5
5–4	Adding a Memory Channel Interconnect or Rolling from a
	Dual, Redundant MC1 Interconnect to MC2 Interconnects ....	5–15
6–1	Telnet Session Default User Names for Fibre Channel
	Switches	6–22
6–2	Converting Storageset Unit Numbers to Disk Names	6–43
8–1	TZ88N-VA Switch Settings	8–3
8–2	Hardware Components Used to Create the Configuration
	Shown in Figure 8–2	8–4
8–3	DS-TZ89N-VW Switch Settings	8–7
8–4	Hardware Components Used to Create the Configuration
	Shown in Figure 8–5	8–13
8–5	Hardware Components in the Configuration in Figure 8–6 ....	8–16
8–6	Hardware Components Used to Create the Configuration
	Shown in Figure 8–6	8–19
8–7	Hardware Components Used to Create the Configuration
	Shown in Figure 8–9	8–28
8–8	Hardware Components Used to Create the Configuration
	Shown in Figure 8–10	8–33

Contents xv