Configuration Manager

Messages

The Configuration Manager for the ICU identifies prob- lems following system boot and generates messages if necessary. These messages alert you to any unsuccessful

attempts to configure Plug and Play or Peripheral Com- ponent Interconnect (PCI) expansion cards, as well as any problems that interfere with the operation of the Con- figuration Manager. If you receive a message from the Configuration Manager, see Table B-2 for suggestions on resolving any problems indicated by the message.

Table B-2. Configuration Manager Messages

Message

Probable Cause

Corrective Action

 

 

 

Found Plug and Play ISA card: Plug and Play ISA Card Name.

This message appears at sys- Status message; no action is required. tem start-up for each Plug

and Play ISA expansion card recognized by the Con- figuration Manager.

NOTICE: Boot Device Not

A boot device was found to

Status message; no action is required. The Con-

Active! CSN=Card Select

be inactive.

figuration Manager automatically configures

Number.

 

and activates the device.

 

 

 

One or more active

You modified the resource

Reboot the system to reconfigure the card(s).

devices have been

values of one or more PCI or

 

reconfigured -- system

Plug and Play ISA expan-

 

requires reboot. Press

sion cards.

 

any key to reboot sys-

 

 

tem.

 

 

The Plug and Play ISA card has been success- fully configured.

Card Count Plug and Play ISA cards have been successfully con- figured.

The Configuration Manager has successfully configured the given number of cards.

If this message does not match the number of Plug and Play ISA expansion cards installed in your computer, reinstall any Plug and Play expansion cards not listed and reboot the sys- tem.

ERROR: Insufficient CM

There is not enough memory

Disable any TSR programs or any unneeded

Memory

available to the Configura-

device drivers.

 

tion Manager for it to run.

 

 

 

 

ERROR: Fatal BIOS

A BIOS call failed with an

See the chapter titled “Getting Help” in your

error Internal Error

internal error. The most

Diagnostics and Troubleshooting Guide for

Code.

likely cause is an incompati-

instructions on obtaining technical assistance.

 

bility between the BIOS and

 

 

the Configuration Manager.

 

NOTE: For the full name of an abbreviation or acronym used in this table, see the Glossary in the online System User’s Guide.

ISA Configuration Utility Messages

B-5

Page 103
Image 103
Dell Mini Tower System manual Table B-2. Configuration Manager Messages